Frigidaire Range F1 Error Code
F1 is a control failure code on older Frigidaire ranges and wall ovens with an electronic oven control.
Specialized Frigidaire Appliance Repair in San Francisco
Mon–Sat: 8:00 AM – 7:00 PM
A current Gallery 30-inch electric range, repaired after a proper test of oven and surface.
The GCFE3060BF is listed by Frigidaire as a current Gallery electric range, 30 inches wide. Being a current model, it is a good candidate for repair rather than replacement.
A 30-inch electric range has two jobs under one control: the oven and the cooktop surface. Problems can be in one or both, and an F-code on the display often tells us which area to investigate first.
An oven that runs hot or cold, bakes unevenly or will not start is usually a sensor, element or control issue. Our post on uneven baking and the one on temperature too high or low help you describe what you see. A door that stays locked after a clean cycle is covered in the self-clean post.
A sensor fault appears on the F3 page, a shorted keypad on the F11 page, and a door-lock fault on the F90 page. After any code, switch the oven off and note what you did just before.
If a surface element stays cold, check the breaker and look for scorching on the element or its socket. A burning smell or sparks means the breaker goes off at once. Do not pull the range out or open the back panel.
We confirm the model on the frame or drawer front edge, test the symptom and quote in writing. Repairs begin only on approval. Read more on Frigidaire range repair, and see the lineup under Frigidaire ranges.
Frigidaire ranges are common in rental kitchens and starter remodels. Wall clearance, anti-tip hardware and the plug type all affect how the range is moved. If your range has been pulled out recently, tell us when booking so we can check the way it was reinstalled. More electric ranges are under Frigidaire ranges.
A range with a current status is likely to have parts available, but we confirm that on the diagnosis visit.
Does the problem affect the oven, the surface, or both? Does it appear only in bake mode or in every mode? Is there a code on the display? Have you tried one power reset? The answers shape the diagnosis and shorten the visit, and the written estimate then reflects only what was actually found.
It is a current model.
Yes, it is in the Gallery series and is a 30-inch size.
You can try one controlled power reset. If the code returns, book a diagnosis.
After a clean cycle the lock waits for the oven to cool. If it stays locked afterward, it needs a technician.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.