Frigidaire Dishwasher CE Error Code
ER/CE reports a configuration error on FGHD2465NW/NB dishwashers.
Specialized Frigidaire Appliance Repair in San Francisco
Mon–Sat: 8:00 AM – 7:00 PM
The UW version of the 1831 dishwasher, with a 2023 market date.
Here is the FFBD1831UW, another entry from the 1831 group with a 2023 market date.
Rather than repeat the symptoms covered under its siblings, we stay with the controls here: when a dishwasher is dead, half-alive or confusing, what the owner can reasonably check and what must wait for a technician.
Check the breaker and, if the dishwasher is plugged in under the sink, whether the outlet is live. Close the door firmly; many controls ignore the keys until the latch registers. If lights flicker, note the pattern. Our guide to a door that will not latch covers the same ground.
If it fills then stops, check the supply valve is fully open. If it washes but the water remains, clean the filter. If the cycle ends early, write down the time and any code. The UF page and the Th page explain two fault displays this family uses.
Do not pull the unit out on its supply lines, do not open the control panel, and do not bridge a switch. Disconnecting power at the breaker is the safest step if anything smells hot.
We read the model on the door label, confirm the fault, and write the estimate. Nothing starts without your yes. See Frigidaire dishwasher repair and Frigidaire dishwashers for background.
In condos, the dishwasher’s shutoff is sometimes behind a cabinet with no access panel, which slows a quick response. Find it now and note the location. If a leak ever appears, closing the valve and switching the breaker off protects the floor. For related models, go to Frigidaire dishwashers.
Switch the dishwasher’s breaker off, wait a short while, and switch it back on. Do this once. If the panel still behaves the same way, repeating it adds nothing, and the fault needs a technician. Write down any light pattern you saw before booking.
Watch the first full cycle and confirm the panel, fill, wash and drain all behave. If anything repeats, tell us what you saw.
It is a separate version. We do not decode it; the label confirms the details.
Often an unlatched door or a control needing a reset. Try one controlled reset and close the door again.
Not always, but it is the quickest safe check and often the cause.
We plan around who can give access; tell us at booking.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.