Frigidaire Dishwasher CE Error Code
ER/CE reports a configuration error on FGHD2465NW/NB dishwashers.
Specialized Frigidaire Appliance Repair in San Francisco
Mon–Sat: 8:00 AM – 7:00 PM
The US version of the 1831 listing, handled like any dishwasher: symptoms first.
The FFBD1831US shares its base number with the UB and UW versions and, like them, carries a 2023 market date. That is the extent of what we state about it.
Calls on this number tend to start with a sound. A hum with no water movement, a grinding that begins at the pump, or a rattle from loose items are all different problems that sound alike on the phone.
Our article on grinding, humming and rattling goes through what each tells us.
A leak near the door can be a worn gasket or a stray rack. A leak beneath the unit may be the inlet fitting or a hose. Dry the area, run a short cycle, and note where the first drop appears. Shut the supply valve under the sink if water collects.
A latch warning is on the CL page, and a switch fault on the ER page.
Provide the label number and the noise description. After the diagnosis you receive a written estimate and decide. See Frigidaire dishwasher repair for the general routine, or browse Frigidaire dishwashers.
First we check the sink side and the supply, then run the cycle with the door closed, listening and watching. A noise that disappears when the rack is lifted is a different story from one that comes from the pump housing. The overview of all models is under Frigidaire dishwashers.
Does the noise start at the beginning of the cycle or later? Does it change with the water level? Did anything fall behind the racks? Have the filter and the lower arm been checked? Short answers help us arrive with a realistic plan, and they keep the visit focused on the one fault.
Run a normal load and listen at the start, middle and end. A quiet cycle with an empty bottom tub means the job is done; anything odd is worth mentioning promptly.
All three are dated 2023. Finish or minor details may differ; we confirm on the label.
Stop it. Run it only after the sump has been checked, or the pump may be damaged.
Possibly, or the sink plumbing. Dry everything and watch where the water starts.
Leave it. The latch sits inside the door, and opening it is not an owner task.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.