Frigidaire Cooktop 64 Error Code

Overview of 64

• Zone: right rear
• Reading: inductor temperature sensor too hot
• Cooktop: earlier 30-inch induction model with a ceramic glass top, sheet 318200282 Rev B

Technician steps in the sheet’s order

1. Ventilation: the cooktop’s airway and its fan must both be correct.
2. Isolation: the white isolation material must be complete and wrapped around the entire inductor.
3. Sensor attachment: the inductor temperature sensor must be connected correctly at the Induction House Assembly.
4. Resistance: read the blue sensor wires at room temperature, where approximately 1000 ohms is expected; otherwise a new inductor goes in.
5. Associated generator circuit board: replaced as the final step on the list.

Until then, leave the cooktop switched off.

Related codes

• Code 61, left front, too hot.
• Code 65, right front, too hot.
• Code 71, a generator sync error on the right side.

Bay Area cooktop repair for Frigidaire

San Francisco customers can book through (415) 319-6371. Keep the model number, the 64 code and notes on steps already taken close by. Read Frigidaire cooktop repair.

Code 64 means the right rear inductor temperature sensor reads too hot.